Overview 11
Key Functions
These keys activate jogging using the arrow keys when in
the manual mode. Manual key functions (indicated in
green) are available at the Manual, Pause and Align
Screens. This keypad is also used for navigating through
a multi-variable dialog box (indicated in yellow).
The Prev/Next buttons are used to move through the field
boxes, Page Up/Down is used to scroll and the arrow
keys are used to select items in a dialog box.
The alpha–numeric keypad is used to enter numeric
data or text. To enter a number, simply press the
key. To enter a word, press and hold the matching
colored shift key (up arrow) while pressing the
desired letter key. The + (plus) and – (minus) keys
are used to add and delete features at selection and
check boxes.
Can be pressed at any time (except during cut) to return to the previous
menu without saving any changes. Located above the Cancel key are the \
and : characters which are used for mapping network drives.
Causes the last number entered/toggled to be accepted. Located above
the enter key are the < and > characters which are used for mapping
network drives.
Deletes the current character in the data entry field and backs up one
position in the field. Located above the Back Space key are the * and ?
characters which are used as wild cards to search for files.
Pressing the space key inserts a space into the current data entry field. The
space key is also used to toggle between fixed logic settings ( i.e. setups -
preheat sense input open/closed ). The space key may also be used to add
and delete features at selection and check boxes.
An alternate (ALT) soft key indicates that
more soft keys and features are available
by pressing this soft key on screen.
When the alternate soft key is displayed,
the purple shift can also be used to view
additional soft keys.
To Next Page
Loading...
Need help?
General
