Global graceful-restart stale paths time is 360 seconds
Graceful-restart path selection defer time is 360 seconds
This platform supports only the receiver role of graceful restart
Route Distinguisher: 100:11
Import route map: test2-import-map
Export route map: test1-export-map (can not filter routes)
Global import route map: test3-global-import-map
103 routes imported from global table (max 5000 routes allowed)
Global export route map: test4-global-export-map
Local-RIB version 7. FIB version 7.
Messages Messages Prefixes
Neighbor AS State Up/down time Sent Received Received
11.11.11.11 400 Established 00:36:19 78 81 2
12.12.12.12 400 Established 00:36:21 78 78 1
103.103.103.3 300 Established 00:36:34 85 80 2
To display the status of next hop reachability checking by specifying vpnv4:
host1#show ip bgp vpnv4 all summary
Local router ID 10.13.5.19, local AS 100
Administrative state is Start
BGP Operational state is Up
...
Default IPv4-unicast is enabled
Redistribution of iBGP routes is disabled
Check reachability of next-hops for VPN routes is enabled
...
To display the status of fields related to enabling local AS numbers to be received in
routes:
host1#show ip bgp summary fields remote-as state rib-version
send-queue-length more-in-queue
Send More
Neighbor AS State RIB Ver Q InQ
2.2.2.2 100 Established 2 0 no
Meaning Table 47 on page 201 lists the show bgp ipv6 summary command output fields.
Table 47: show bgp ipv6 summary Output Fields
Field DescriptionField Name
Router ID of the local routerLocal router ID
Local autonomous system numberlocal AS
BGP administrative state, start or stopAdministrative state
Operational state, up, down, or overloadBGP Operational state
Status, enabled or disabledShutdown in overload state
Default value for local preferenceDefault local preference
Synchronization status, enabled or disabledIGP synchronization
Whether network 0.0.0.0 is redistributed into BGP (enabled) or not
(disabled)
Default originate
201Copyright © 2010, Juniper Networks, Inc.
Chapter 2: Monitoring BGP