•
Issue the clear ip bgp command and specify l2vpn vpws vpwsName.
host1#clear ip bgp l2vpn soft in
To clear BGP reachability information for all VPLS and VPWS instances in the L2VPN
address family:
•
Issue the clear ip bgp command and include the l2vpn all keywords.
host1#clear ip bgp l2vpn all soft in
Use the soft in keywords to trigger inbound soft reconfiguration.
Clearing BGP Route Flap Dampening Information for the L2VPN Address Family
To clear route flap dampening information for a specific VPWS instance in the L2VPN
address family:
•
Issue the clear ip bgp dampening command and specify l2vpn vpws vpwsName.
host1#clear ip bgp l2vpn dampening l2vpn vpws l2vpnBoston
To clear route flap dampening information for all VPLS and VPWS instances in the L2VPN
address family:
•
Issue the clear ip bgp dampening command and include the l2vpn all keywords.
host1#clear ip bgp l2vpn all dampening
Clearing the Wait for the End-of-RIB Marker for the L2VPN Address Family
To clear the wait for receiving an End-of-RIB marker from the peer for all VPWS instances
in the L2VPN address family:
•
Issue the clear ip bgp wait-end-of-rib command and specify l2vpn vpws vpwsName.
host1#clear ip bgp l2vpn vpws l2vpnBoston wait-end-of-rib
To clear the wait for receiving an End-of-RIB marker from the peer for all VPLS and VPWS
instances in the L2VPN address family:
•
Issue the clear ip bgp wait-end-of-rib command and include the l2vpn all keywords.
host1#clear ip bgp l2vpn all wait-end-of-rib
Related Topics Configuring BGP Routing on page 3•
• clear ip bgp
• clear ip bgp dampening
• clear ip bgp wait-end-of-rib
Monitoring BGP-Related Settings for VPWS L2VPNS
Purpose This section provides examples of some of the show ip bgp commands that you can use
to monitor VPWS configurations.
Copyright © 2010, Juniper Networks, Inc.664
JunosE 11.2.x BGP and MPLS Configuration Guide
To Next Page
Loading...
Need help?
General
