EasyManuals Logo
Home>Juniper>Software>JUNOSE 11.2.X BGP AND MPLS

Juniper JUNOSE 11.2.X BGP AND MPLS User Manual

Juniper JUNOSE 11.2.X BGP AND MPLS
742 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #391 background imageLoading...
Page #391 background image
Dropped committed packets 0, bytes 0
Dropped conformed packets 0, bytes 0
Dropped exceeded packets 0, bytes 0
MPLS minor interface lsp-02020202-1-4 (receive)
Stacked on MPLS major ATM2/0.10
Operational state is up
MPLS minor interface UID is 0x1a000004
Lower MPLS major interface UID is 0x19000001
Statistics not enabled for this interface
To display summary information about MPLS minor interfaces:
host1:pe1#show mpls minor-interface brief
Lower Oper
Interface MplsMajor state Direction
---------------- --------- ----- ---------
pe1-to-pe2 ATM2/0.10 up transmit
lsp-02020202-1-4 ATM2/0.10 up receive
ERX-01-0c-d7:pe1#
Meaning Table 77 on page 355 lists the show mpls minor-interface command output fields.
Table 77: show mpls minor-interface Output Fields
Field DescriptionField Name
Specifier and status of each interfaceInterface
Related Topics show mpls minor-interface•
Monitoring MPLS Next Hops
Purpose Display MPLS next hops and any available next-hop statistics.
Next hops can be pointed to by MPLS forwarding entries on an LSR, IP or IPv6 routes on
an LER, and VPLS bridge groups.
Action To display MPLS next hops:
host1:vr2#show mpls next-hop
MPLS next-hop: index 1, lookup on inner header/label
Statistics are not collected for MPLS switch-context next-hops
MPLS next-hop: index 2, lookup in router pe1
Statistics are not collected for MPLS switch-context next-hops
MPLS next-hop: index 22, ECMP next-hop, leg count 2
MPLS next-hop: index 20, label 36 on FastEthernet1/1.120, neighbor 10.120.120.1
MPLS next-hop: index 21, label 36 on ATM2/1.20, neighbor 10.20.20.1
Statistics are not collected for MPLS ECMP next-hops
MPLS next-hop: index 24, label 17, resolved by MPLS nextHop index 10
MPLS next-hop: index 10, resolved by MPLS nextHop index 14, peer address
10.1.1.1
MPLS next-hop: index 14, ECMP next-hop, leg count 2
MPLS next-hop: index 12, label 32 on FastEthernet1/1.120, neighbor
10.120.120.1
MPLS next-hop: index 13, label 32 on ATM2/1.20, neighbor 10.20.20.1
Sent:
0 packets
355Copyright © 2010, Juniper Networks, Inc.
Chapter 5: Monitoring MPLS

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Juniper JUNOSE 11.2.X BGP AND MPLS and is the answer not in the manual?

Juniper JUNOSE 11.2.X BGP AND MPLS Specifications

General IconGeneral
BrandJuniper
ModelJUNOSE 11.2.X BGP AND MPLS
CategorySoftware
LanguageEnglish

Related product manuals