Juniper JUNOSE 11.2.X BGP AND MPLS User Manual

Table 120: show bridge interface Output Fields (continued)
Field DescriptionField Name
Number of frames transmitted on this interfaceOut Frames
Number of outgoing packets discarded on this interfaceOut Discards
Number of outgoing errors on this interfaceOut Errors
Elapsed time since statistics counters were last resetTime since counters last
reset
Hardware packet queue associated with the specified traffic class
and interface
queue
Length of the queue, in bytesQueue length
Number of packets and bytes forwarded on this queueForwarded packets, bytes
Number of committed packets and bytes that were droppedDropped committed
packets, bytes
Number of conformed packets and bytes that were droppedDropped conformed
packets, bytes
Number of exceeded packets and bytes that were droppedDropped exceeded
packets, bytes
Identifies the VPLS virtual core interface for the VPLS instancevpls vplsName
Table 121 on page 619 lists the show bridge interface brief command output fields.
Table 121: show bridge interface Output Fields
Field DescriptionField Name
Interface type and specifier associated with the portInterface
Port number on which this interface residesPort
Operational status of the physical interface: Up, Down,
LowerLayerDown, NotPresent
Status
Related Topics show bridge interface•
Monitoring Configuration, Statistics, and Status for VPLS Core Interfaces
Purpose Display configuration, statistics, and status information for the VPLS virtual core interface
associated with a VPLS instance.
619Copyright © 2010, Juniper Networks, Inc.
Chapter 13: Monitoring VPLS

Juniper JUNOSE 11.2.X BGP AND MPLS Specifications

General

Brand	Juniper
Model	JUNOSE 11.2.X BGP AND MPLS
Category	Software
Language	English