Juniper JUNOSE 11.2.X BGP AND MPLS User Manual

RRO IPv4 hop 221.1.1.2 (strict)
ADSPEC --
IN ERO IPv4 hop 221.1.1.1 (strict)
IPv4 hop 122.1.1.1 (strict)
OUT ERO IPv4 hop 122.1.1.1 (strict)
SES ATTR Setup Pri 4, Hold Pri 4, name --
Flags : IngressReRoute
TTC --
Policy Object --
Unknown Objects --
Flags : InUse
PathRefreshSent
RSB: Timeout 157500 label 16
Associated Minor Interface: Tunnel 223.10.1.1:1
FlowSpec CType IntServ Controlled Load
Token Bucket Rate 0
Token Bucket Size 0
Peak Data Rate 0
Min Policed Unit 0
Max Packet Size 0
RRO IPv4 hop 122.1.1.1 (strict)
Policy Object --
Unknown Objects --
Flags : InUse
StyleConverted
ResvRefrSent
Meaning Table 81 on page 359 lists the show mpls rsvp command output fields.
Table 81: show mpls rsvp Output Fields
Field DescriptionField Name
Path state control blockPSB
Reservation state control blockRSB
IP address of PSB or RSB senderSender
ID of LSPLSPId
Period of time in milliseconds before PSB/RSB times out if no refresh
arrives.
timeout
Incoming label informationInLabel
Tunnel identifier for minor interface for which the RSVP information
is displayed
Associated tunnel
Penultimate hop interfacePHopIntf
Incoming interfaceIncomingIntf
Outgoing interfaceOutgoingIntf
Penultimate hop addressPHopAddr
359Copyright © 2010, Juniper Networks, Inc.
Chapter 5: Monitoring MPLS

Juniper JUNOSE 11.2.X BGP AND MPLS Specifications

General

Brand	Juniper
Model	JUNOSE 11.2.X BGP AND MPLS
Category	Software
Language	English