Juniper JUNOSE 11.2.X BGP AND MPLS User Manual

BridgeGroup: vplsA(vpls)
Bridge Mode: default
Aging Time: 300 secs
Learning: Enabled
Max Learn: Unlimited
Link Status Snmp Traps: Disabled
Subscriber Policy: default Subscriber
Port Count: 2
Interface Count: 1
Transport Virtual Rtr: default
Route Distinguisher: 1.1.1.1:10
SiteName: boston
SiteId: 1
Multi-homed: Yes
Site-Priority: 45
SiteRange: 10
VPLS Route Targets
Route Target: RT:100:1 (both)
Route Target: RT:100:2 (both)
Flood Next Hop: Index 1048577
BridgeGroup: vplsB(vpls)
Bridge Mode: default
Aging Time: 300 secs
Learning: Enabled
Max Learn: Unlimited
Link Status Snmp Traps: Disabled
Subscriber Policy: default Subscriber
Port Count: 2
Interface Count: 1
Transport Virtual Rtr: default
Route Distinguisher: 1.1.1.1:11
SiteName: boston
SiteId: 1
Multi-homed: No
SiteRange: 20
VPLS Route Targets
No Route Targets configured
Flood Next Hop: Index 1048578
Meaning Table 119 on page 615 lists the show bridge group details command output fields.
Table 119: show bridge groups details Output Fields
Field DescriptionField Name
Name of the VPLS instance for which information is displayedBridgeGroup
Bridging capability currently enabled; for a VPLS instance, this field
always displays default
Bridge Mode
Length of time, in seconds, that a MAC address entry can remain in
the forwarding table before expiring
Aging Time
Whether acquisition of dynamically learned MAC addresses is
enabled or disabled
Learning
615Copyright © 2010, Juniper Networks, Inc.
Chapter 13: Monitoring VPLS

Juniper JUNOSE 11.2.X BGP AND MPLS Specifications

General

Brand	Juniper
Model	JUNOSE 11.2.X BGP AND MPLS
Category	Software
Language	English