Juniper JUNOSE 11.2.X BGP AND MPLS User Manual

Table 76: show mpls interface Output Fields (continued)
Field DescriptionField Name
Number of hello messages receivedhello recv
Number of hello messages senthello sent
Number of hello messages rejectedhello rej
Number of adjacencies set upadj setup
Number of adjacencies deletedadj deleted
Related Topics show mpls interface•
Monitoring MPLS Minor Interfaces
Purpose Display status and configuration information about MPLS minor interfaces.
The show mpls interface minor command displays the same information.
Action To display information about MPLS minor interfaces:
host1:pe1#show mpls minor-interface
MPLS minor interface pe1-to-pe2 (transmit)
Stacked on MPLS major ATM2/0.10
Operational state is up
Sent:
0 packets
0 bytes
queue 0: traffic class best-effort, bound to atm-vc ATM2/0.10
Queue length 0 bytes
Forwarded packets 0, bytes 0
Dropped committed packets 0, bytes 0
Dropped conformed packets 0, bytes 0
Dropped exceeded packets 0, bytes 0
MPLS minor interface lsp-02020202-1-4 (receive)
Stacked on MPLS major ATM2/0.10
Operational state is up
Statistics not enabled for this interface
To display detailed information about MPLS minor interfaces:
host1:pe1#show mpls minor-interface detail
MPLS minor interface pe1-to-pe2 (transmit)
Stacked on MPLS major ATM2/0.10
Operational state is up
MPLS minor interface UID is 0x1a000001
Lower MPLS major interface UID is 0x19000001
Sent:
0 packets
0 bytes
queue 0: traffic class best-effort, bound to atm-vc ATM2/0.10
Queue length 0 bytes
Forwarded packets 0, bytes 0
Copyright © 2010, Juniper Networks, Inc.354
JunosE 11.2.x BGP and MPLS Configuration Guide

Juniper JUNOSE 11.2.X BGP AND MPLS Specifications

General

Brand	Juniper
Model	JUNOSE 11.2.X BGP AND MPLS
Category	Software
Language	English