Table 76: show mpls interface Output Fields (continued)
Field DescriptionField Name
Number of address withdraw messages received or received bad
or sent
addr withdraw
Number of message IDs received or sentmsgId
Number or unknown message type errors receivedunknown message type err
Last received notification codelast info error code
Loop detected; for downstream on demandloop detected
Number of hello messages receivedhello recv
Number of hello messages senthello sent
Number of hello messages received badbad hello recv
Time in hh:mm:ss since adjacency set upadj setup time
Time in hh:mm:ss since last hello message receivedlast hello recv time
Time in hh:mm:ss since last hello message sentlast hello sent time
Number of packets received whose labels are not recognizedfailed lbl lookup
Number of octets received or sentoctets
Number of high-capacity (64-bit) octets received or senthcoctets
Number of packets received or sentpkts
Number of high-capacity (64-bit) packets received or senthcpkts
Number of packets that are dropped for some reason at receipt or
before being sent
errors
Number of packets that are discarded due to lack of buffer space
at receipt or before being sent
discards
Number of adjacencies currently establishedadjacency
Number of sessions currently establishedsession
Cumulative total number of adjacencies established since interface
is up
accum adjacency
Cumulative total number of sessions established since interface is
up
accum session
353Copyright © 2010, Juniper Networks, Inc.
Chapter 5: Monitoring MPLS
To Next Page
Loading...
Need help?
General
