Table 68: show ldp neighbor Output Fields (continued)
Field DescriptionField Name
Value for recovery time received from peer in FT TLV, in millisecondsRecovery Time
Status of the neighbor’s graceful restart, one of the following:State
LDP session is not establishednonexistent
Neighbor LSR is restartingrestarting
Session with neighbor LSR has reestablished after the neighbor
restarted; label bindings are being exchanged
recovering
LDP session is upoperational
IP address of LDP peerNeighbor
Number of initialization messages received and sentInitialization
Number of keepalive messages received and sentKeepalive
Number of notification messages received and sentNotification
Number of address messages received and sentAddress
Number of address withdraw messages received and sentAddress withdraw
Number of label mapping messages received and sentLabel mapping
Number of label request messages received and sentLabel request
Number of label withdraw messages received and sentLabel withdraw
Number of label release messages received and sentLabel release
Related Topics show ldp neighbor•
Monitoring LDP Profiles
Purpose Display a specific LDP profile, or all LDP profiles.
Action To display the default LDP profile:
host1:pe2#show ldp profile default
ldp profile default: used by 2 interfaces
session retry: 10 times at interval 10
339Copyright © 2010, Juniper Networks, Inc.
Chapter 5: Monitoring MPLS
To Next Page
Loading...
Need help?
General
