Juniper JUNOSE 11.2.X BGP AND MPLS User Manual

Figure 108: Carrier-of-Carriers VPN Service
Configuration Steps
You must complete the following configuration process when the customer carrier
provides VPN services for its customers.
On the provider carrier’s PE router:
1. Configure MPLS.
2. Configure BGP.
3. Configure an IGP.
473Copyright © 2010, Juniper Networks, Inc.
Chapter 6: Configuring BGP-MPLS Applications

Juniper JUNOSE 11.2.X BGP AND MPLS Specifications

General

Brand	Juniper
Model	JUNOSE 11.2.X BGP AND MPLS
Category	Software
Language	English