Juniper JUNOSE 11.2.X BGP AND MPLS User Manual

Table 47: show bgp ipv6 summary Output Fields (continued)
Field DescriptionField Name
Number that is increased by one each time BGP updates the routes
in the IP routing table based on changes in the local RIB. The FIB
version matches the local-RIB version when BGP has finished
updating the routes in the IP route table. The FIB version is less than
the local-RIB version when BGP is still in the process of updating
the IP routing table.
FIB version
BGP neighborsNeighbor
AS number of the peerAS
Negotiated BGP version numberVer
State of the connectionState
Time the connection has been up or downUp/down time
Number of messages sent to peerMessages sent
Number of messages received from peerMessages received
Number of prefixes received from peerPrefixes received
Last RIB version queued to be sent to peerRib Ver
Number of messages queued to be sent to peerSend Q
Status indicating whether any messages are waiting to be sent to
peer
More InQ
Related Topics show bgp ipv6 summary•
• show ip bgp summary
Monitoring All Routes in a BGP Community List
Purpose Display routes that are permitted by a BGP community list.
Action To display routes that are permitted by a BGP community list:
host1#show ip community-list
Community List 1:
permit 752877569 (11488:1)
permit 752877570 (11488:2)
permit 752877571 (11488:3)
permit 752877572 (11488:4)
Community List 2:
permit 4294967043 (local-as)
Copyright © 2010, Juniper Networks, Inc.204
JunosE 11.2.x BGP and MPLS Configuration Guide

Juniper JUNOSE 11.2.X BGP AND MPLS Specifications

General

Brand	Juniper
Model	JUNOSE 11.2.X BGP AND MPLS
Category	Software
Language	English