Table 138: show ip bgp l2vpn all next-hops Output Fields (continued)
Field DescriptionField Name
Index number of the IP indirect next hop that corresponds to the
BGP indirect next hop and its resolution
IP indirect next-hop index
Index number of the MPLS indirect next hop that corresponds to
the BGP indirect next hop and its resolution
MPLS indirect next-hop
index
Indicates whether or not the indirect next hop is reachable. For more
information about the reachability rules that apply for various route
types, see the command description for show ip bgp next-hops.
Reachable
Metric number of the BGP indirect next hopmetric
Number of the equal-cost legs of direct next hops to which this
indirect next hop resolves
Number of direct next-hops
MPLS next-hop index that resolves the MPLS indirect next hopDirect next-hop
Number of label mappings of BGP routes that use this next hopReference count
Related Topics show ip bgp next-hops•
Monitoring VPWS Connections
Purpose Display configuration and status information for VPWS L2VPN connections configured
on the router. The details keyword displays detailed information about the connections.
Action To display detailed information about connections for all VPWS instances configured
on the router:
host1:pe1# show l2vpn connections details
L2VPN: l2vpn1
Encapsulation Type Ethernet
Use of control word is preferred
Send sequence numbers
Route Distinguisher 100:11
Site Range 10
Sites:
Site Name westford Site Id 1
Multi-homed: Yes
Site-Priority: 45 Route Targets:
Route Target: RT:100:1 both
Admin Oper
Interface Local-Site-Id Remote-Site-Id state state
--------------- ------------- -------------- ------- -----
FastEthernet4/1 1 2 enabled up
Connections status code:
UP = Operational
SC = Local and Remote Site Identifier Collision
EM = Encapsulation Mismatch
OR = Out of Range
Copyright © 2010, Juniper Networks, Inc.670
JunosE 11.2.x BGP and MPLS Configuration Guide
To Next Page
Loading...
Need help?
General
