Juniper JUNOSE 11.2.X BGP AND MPLS User Manual

Table 75: show mpls forwarding Output Fields (continued)
Field DescriptionField Name
Signaling protocol that placed the label in the forwarding table:
BGP, LDP, or RSVP-TE
Owner
Type and location of spoof checking performed on the MPLS packet,
router or interface
Spoof check
Action taken for MPLS packets arriving with that labelAction
Number of packets sent with the labelin pkts
Number of octets sent with the labelin Octets
Number of packets that are dropped for some reason before being
sent
in errors
Number of packets that are discarded due to lack of buffer space
before being sent
in discardPkts
Related Topics show mpls forwarding•
Monitoring MPLS Interfaces
Purpose Display status and configuration information about MPLS interfaces.
Action To display information about all MPLS interfaces:
host1:pe1#show mpls interface
MPLS major interface ATM2/0.10
ATM circuit type is 1483 LLC encapsulation
Administrative state is enabled
Operational state is up
Operational MTU is 9180
Received:
0 packets
0 bytes
0 errors
0 discards
0 failed label lookups
Sent:
0 packets
0 bytes
0 errors
0 discards
LDP information:
10.1.1.2/24
enabled with profile 'default'
0 hello recv, 1 hello sent, 0 hello rej
0 adj setup, 0 adj deleted,
RSVP
Enabled with profile default
Authentication is disabled
Copyright © 2010, Juniper Networks, Inc.348
JunosE 11.2.x BGP and MPLS Configuration Guide

Juniper JUNOSE 11.2.X BGP AND MPLS Specifications

General

Brand	Juniper
Model	JUNOSE 11.2.X BGP AND MPLS
Category	Software
Language	English