EasyManuals Logo
Home>Juniper>Software>JUNOSE 11.2.X BGP AND MPLS

Juniper JUNOSE 11.2.X BGP AND MPLS User Manual

Juniper JUNOSE 11.2.X BGP AND MPLS
742 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #385 background imageLoading...
Page #385 background image
Authentication key: <none>
Hellos are on with an interval of 10000 and miss limit of 4
Hello settings are not inherited
MPLS minor interface pe1-to-pe2 (transmit)
Stacked on MPLS major ATM2/0.10
Operational state is up
Sent:
0 packets
0 bytes
queue 0: traffic class best-effort, bound to atm-vc ATM2/0.10
Queue length 0 bytes
Forwarded packets 0, bytes 0
Dropped committed packets 0, bytes 0
Dropped conformed packets 0, bytes 0
Dropped exceeded packets 0, bytes 0
MPLS minor interface lsp-02020202-1-4 (receive)
Stacked on MPLS major ATM2/0.10
Operational state is up
Statistics not enabled for this interface
• The following excerpt shows the output for MPLS interface atm 5/1.1 when RSVP-TE
is enabled and RSVP-TE authentication is enabled:
host1:pe2#show mpls interface atm 5/1.1
Interface ATM5/1.1 Up
RSVP enabled with profile default
Authentication: enabled
Authentication Key: <a password has been configured>
LDP not configured
IP interfaces on this MPLS interface:
192.168.100.21/30
MPLS Statistics:
Rcvd: 0 failed lbl lookup, 0 octets, 0 hcOctets
0 pkts, 0 hcPkts, 0 errors, 0 discards
Sent: 0 octets, 0 hcOctets, 0 pkts
0 hcPkts, 0 errors, 0 discards
...
To display information about MPLS interface atm 2/0.60:
host1:pe2#show mpls interface atm 2/0.60
Interface atm2/0.60 Up
RSVP not configured
LDP enabled with profile default
IP interfaces on this MPLS interface:
60.60.60.1/16 Session to 4.4.4.4 is operational (active)
Session statistics:
12 label alloc, 12 label learned,
12 accum label alloc, 12 accum label learned,
last restart time = 00:04:44
Rcvd: 0 notf, 29 msg, 12 mapping, 0 request
0 abort, 0 release, 0 withdraw, 1 addr
0 addr withdraw, 29 msgId
0 bad mapping, 0 bad request, 0 bad abort, 0 bad release
0 bad withdraw, 0 bad addr, 0 bad addr withdraw
0 unknown msg type err
last info err code = 0x00000000, 0 loop detected
Sent: 0 notf, 29 msg, 12 mapping, 0 request
0 abort, 0 release, 0 withdraw, 1 addr
0 addr withdraw, 29 msgId
Adjacency statistics:
349Copyright © 2010, Juniper Networks, Inc.
Chapter 5: Monitoring MPLS

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Juniper JUNOSE 11.2.X BGP AND MPLS and is the answer not in the manual?

Juniper JUNOSE 11.2.X BGP AND MPLS Specifications

General IconGeneral
BrandJuniper
ModelJUNOSE 11.2.X BGP AND MPLS
CategorySoftware
LanguageEnglish

Related product manuals