Keithley 2601B Reference Manual

Section
5: Introduction to TSP operation Series 2600B System SourceMeter® Instrument
Reference Manual
5-18 2600BS-901-01 Rev. B / May 2013
TSP-Link
These functions and attributes allow you to set up and work with a system that is connected by a
TSP-Link
®
network.
The TSP-Link
®
is not available on the Models 2604B, 2614B, and 2634B. These commands are not
available on those models.
tsplink.group (on page 7-351)
tsplink.master (on page 7-352)
tsplink.node (on page 7-352)
tsplink.readbit() (on page 7-353)
tsplink.readport() (on page 7-353)
tsplink.reset() (on page 7-354)
tsplink.state (on page 7-355)
tsplink.trigger[N].assert() (on page 7-356)
tsplink.trigger[N].clear() (on page 7-356)
tsplink.trigger[N].EVENT_ID (on page 7-357)
tsplink.trigger[N].mode (on page 7-358)
tsplink.trigger[N].overrun (on page 7-359)
tsplink.trigger[N].pulsewidth (on page 7-360)
tsplink.trigger[N].release() (on page 7-360)
tsplink.trigger[N].reset() (on page 7-361)
tsplink.trigger[N].stimulus (on page 7-362)
tsplink.trigger[N].wait() (on page 7-364)
tsplink.writebit() (on page 7-364)
tsplink.writeport() (on page 7-365)
tsplink.writeprotect (on page 7-366)
TSP-Net
The TSP-Net module provides a simple socket-like programming interface to Test Script Processor
(TSP
®
) enabled instruments.
tspnet.clear() (on page 7-366)
tspnet.connect() (on page 7-367)
tspnet.disconnect() (on page 7-368)
tspnet.execute() (on page 7-369)
tspnet.idn() (on page 7-370)
tspnet.read() (on page 7-370)
tspnet.readavailable() (on page 7-371)
tspnet.reset() (on page 7-372)
tspnet.termination() (on page 7-372)
tspnet.timeout (on page 7-373)
tspnet.tsp.abort() (on page 7-374)
tspnet.tsp.abortonconnect (on page 7-374)
tspnet.tsp.rbtablecopy() (on page 7-375)
tspnet.tsp.runscript() (on page 7-376)
tspnet.write() (on page 7-376)

Keithley 2601B Specifications

General

Brand	Keithley
Model	2601B
Category	Measuring Instruments
Language	English