To Next Page

To Previous Page

Series 2600B

System SourceMeter® Instrument Reference Manual Section 7:

TSP command reference

2600BS-901-01 Rev. B / May 2013 7-129

Also see

lan.lxidomain (on page 7-120)

lan.trigger[N].clear() (on page 7-129)

lan.trigger[N].mode (on page 7-133)

lan.trigger[N].overrun (on page 7-134)

lan.trigger[N].stimulus (on page 7-135)

lan.trigger[N].wait() (on page 7-137)

Understanding hardware value and pseudo line state (on page 3-51)

lan.trigger[N].clear()

This function clears the event detector for a trigger.

Type TSP-Link accessible

Affected by Where saved Default value

Function

Yes

Usage

lan.trigger[N].clear()

The LAN event number to clear (1 to 8)

Details

The trigger event detector enters the detected state when an event is detected. This function clears a trigger

event detector and discards the previous history of the trigger packet.

This function clears all overruns associated with this LAN trigger.

Example

lan.trigger[5].clear()

Clears the event detector with LAN packet 5.

Also see

lan.trigger[N].assert() (on page 7-128)

lan.trigger[N].overrun (on page 7-134)

lan.trigger[N].stimulus (on page 7-135)

lan.trigger[N].wait() (on page 7-137)

Keithley 2601B Reference Manual

Other manuals for Keithley 2601B