Keithley 2601B Reference Manual

Series 2600B
System SourceMeter® Instrument Reference Manual Section 7:
TSP command reference
2600BS-901-01 Rev. B / May 2013 7-69
Example
for displayName, code in
display.loadmenu.catalog() do
print(displayName, code)
end
Output:
Test DUT1() beeper.beep(2, 500)
Part1 testpart([[Part1]], 5.0)
Test9 Test9()
Also see
display.loadmenu.add() (on page 7-67)
display.loadmenu.delete() (on page 7-69)
display.loadmenu.delete()
This function removes an entry from the USER TESTS menu, which can be accessed using the LOAD key on the
instrument front panel.
Type TSP-Link accessible
Affected by Where saved Default value
Function
Yes
Usage
display.loadmenu.delete(displayName)
displayName
The name to be deleted from the USER TESTS menu
Details
If you delete an entry from the USER TESTS menu, you can no longer run it by pressing the LOAD key.
Example
display.loadmenu.delete("Test9")
for displayName, code in
display.loadmenu.catalog() do
print(displayName, code)
end
Deletes the entry named "Test9"
Output:
Test DUT1() beeper.beep(2, 500)
Part1 testpart([[Part1]], 5.0)
Also see
display.loadmenu.add() (on page 7-67)
display.loadmenu.catalog() (on page 7-68)
display.locallockout
This attribute describes whether or not the EXIT (LOCAL) key on the instrument front panel is enabled.
Type TSP-Link accessible Affected by Where saved Default value
Attribute (RW) Yes Power cycle Not saved 0 (display.UNLOCK)
Usage
lockout = display.locallockout
display.locallockout = lockout
lockout
0 or display.UNLOCK: Unlocks EXIT (LOCAL) key
1
or
display.LOCK
: Locks out EXIT (LOCAL) key

Keithley 2601B Specifications

General

Brand	Keithley
Model	2601B
Category	Measuring Instruments
Language	English