3.4 Specification for V2403-CR-TE4BG
Model V2403-CR-TE4BG
Number of cylinder 4
Engine type Vertical, water-cooled, 4-cycle diesel
Bore × Stroke 87 × 102.4 mm (3.43 × 4.031 in.)
Total displacement 2434 cm
3
(148.5 cu.in.)
SAE gross continuous
31.7 kW / 1800 min
-1
(rpm)
(42.6 HP / 1800 min
-1
(rpm))
SAE gross intermittent
36.5 kW / 1800 min
-1
(rpm)
(48.9 HP / 1800 min
-1
(rpm))
Maximum bare speed 2000 min
-1
(rpm)
Minimum bare idling speed 2000 min
-1
(rpm)
Combustion chamber Reentrant type (Direct injection)
Fuel supply pump
BOSCH common rail system
Governor system
Injector
Fuel supply timing
Fuel injection pressure
Direction of rotation Counter-clockwise (Viewed from flywheel side)
Firing order 1-3-4-2
Compression ratio 18.1
Lubricating system Forced lubrication by trochoid pump
Oil pressure indicating Electrical type switch
Lubricating filter Full flow paper filter (Cartridge type)
Cooling system Pressurized radiator, forced circulation with water pump
Starting system Electric starting with starter
Starter motor 12 V, 2.0 kW
Starting support device By glow plug in combustion chamber
EGR External EGR (EGR cooler + Electric EGR valve + Reed valve)
Battery 12 V, 92 AH (130E41R) equivalent
Charging alternator 12 V, 720 W
Fuel Diesel fuel No. 2-D S15, see page 3-1.
Lubricating oil (API classifi-
cation)
Class CJ-4 lubricating oil as per API classification is recommended.
For details on recommended lubricating oils, see page 3-1
.
Lubricating oil capacity 9.5 L (2.5 U.S.gals, 2.1 Imp.gals)
Weight (Dry) 230 kg (507 lbs)
NOTE
• The specification described above is of the standard engine of each model.
•
Conversion formula: HP = 0.746 kW, PS = 0.7355 kW.
GENERAL MACHINE INFORMATION
3. Specifications 2. GENERAL
D1803-CR-E4,D1803-CR-TE4,D1803-CR-TIE4,V2403-CR-E4,V2403-CR-TE4,V2403-CR-TE4BG,V2403-CR-TIE4
To Next Page
Loading...
Need help?
General