Mercury 40 Service Manual

CHARGING AND STARTING SYSTEM
Page 2B-2 90-828631R3 MARCH 1999
Specifications
CHARGING
SYSTEM
Alternator Type
Alternator Output:
Electric Start
Lighting Coil Resistance (Grn - Grn)
Lighting Coil Output Peak Voltage
Three Phase
12 Volts - 10 Amps (Regulated)
1.2 - 3.2 Ohms @ 68°F (20°C)
8.9 Volts @ 1500 rpm
STARTING
SYSTEM
P/N 50-825095 Top Mounted
Electric Start:
Starter Type
Output
Ampere Draw Under:
(Load)
(No Load)
P/N 50-834749 Side Mounted
Starter Type
Output
Ampere Draw Under:
(Load)
(No Load)
Bendix
1.1 kW
106.0 Amps
21.1 Amps
Bendix
1.1 kW
95.0 Amps
20.0 Amps
BATTERY
Battery Rating
Minimum Requirement
For operation below 32° F (0° C)
465 Marine Cranking Amps (MCA)
or 350 Cold Cranking Amps (CCA)
1000 Marine Cranking Amps (MCA) or
775 Cold Cranking Amps (CCA)

Mercury 40 Specifications

General

Brand	Mercury
Model	40
Category	Outboard Motor
Language	English