MG TF Series User Manual

GENERAL INFORMATION-continued
SIDESCREEN STOWAGE (FIRST TYPE) (For details of second type see pages 17 and IS)
It Is of
the utmost importance that the sldescreens be packed together exactly as Indicated.
otherwise It will
not be found possible to insert them Into the compartment In the boot provided
to house them. The necessary sequence Is shown below.
Q)
Start with the
right-hand front side-
screen and lay
it down
on something flat as
indicated In
(I). taking
care
that the stays are
the rlghtway up. Then
place
the left-hand
front sldescreen on top
of It as shown, with Its
flap folded under and
the stays at opposite
ends as illustrated•
..
The right-hand rear sidescreen Is the n placed on top of the other two as shown In (2). tucking
Its front bracket underneath
that of the left-hand front sldescreen, so that It lies flat upon the
other. taking up the minimum amount of room.
10
This Is followed
by
the left-hand rear
stdescreen,which Islaid
upon
the others in the
opposite direction with
Its bracket slipped
under the cranked stay
of the right-hand front
sldescreen with which
the pack was first
started
(3). This pro·
duces a pack of
minimum dimensions.
as shown
In (4).
@
M.G. Midget (Series "TD "). Issue 2 (E) 79345-1/53
Wishvilles Classic
Automobile Library

MG TF Series Specifications

General

Brand	MG
Model	TF Series
Category	Automobile
Language	English