MG TF Series User Manual

GENERAL INFORMATION-continued
Finally the com-
plete pack
of screens
(4) Is transferred to
the space In the body
behind
the seat pro-
vided to house them.
They should be
Inserted into the com-
partment, bracketsfirst
(5). taking care that
they are not forced into
position
or damaged,
and hold lng back
the
edge of hood to facili-
tate their insertIon as
shown at (6).
®
FOLDING THE HOOD
To ensure that the hood does not receive unnecessary damage It is Important that It should
be folded
correctly when stowed. The four steps for correctly folding the hood are here shown.
Neverfold the hood when Itls damp or wet. Always wait till It dries.
Before folding
the hood back.
release
the press buttons at each side.
Make
sure that no hood material Is
trapped between the hood-sticks. and
that the rear panel of the hood Is
pulled well forward. as at
(I). Then
fold
the hood-sticks right down and
gently pull
the hood material out as
at
(2.).
Now fold the two corners in at
right angles. and fold
the hood as
illustrated in
(3). The hood material
Is
then folded over again as shown at
(4). and
it is then ready for the
tonneau cover to be fltted over It.
M.G. Midget (Series" TO "). Issue 2 (E) 8/52 II
Wishvilles Classic
Automobile Library

MG TF Series Specifications

General

Brand	MG
Model	TF Series
Category	Automobile
Language	English