MG TF Series User Manual

CD
GENERAL INFORMATION-continued
SIDESCREEN STOWAGE (SECOND TYPE)
Later models are fitted with a modified hood and deeper sidescreens. The following
directions must be followed when carrying out the stowage of the sldescreens on such models,
and no
attempt must be made to stow them as described on pages 10and II.
Start with the
left-hand rear side-
screen and place it in
the space provided for
housing the side-
screens, as in Fig. J,
with the attachment
lugs faclng towards the
front of the car and
with the canvas part
up against the left-
hand
body panel. The
right-hand rear side-
screen should now be
placed in
front of the
first one, again with
the attachment lugs
facing
towards the
front of the car, but
with the canvas part
up against the right-hand panel, as in Fig. 2.
@
material of which the screens are made.
unnecessary.
Insert the right-
hand front stdescreen
as in Fig. 3 with its
lugs pointing
down-
wards and its flap
folded
under towards
the rear of the car.
Make
sure that it is
inserted as far down-
wards as it wi II go.
This
is followed by the
left-hand front side-
screen, which is also
Inserted with Its
attachment lugs to the
bottom and its flap
folded
under to the
rear, as In Fig. 4. Be
careful
not to scratch
the transparent
If stowage is carried out correctly the use of force is
B
M.G. Midget (Serle$ .. TO ,. J. tUue I (E) 79145-1/53
17
Wishvilles Classic
Automobile Library

MG TF Series Specifications

General

Brand	MG
Model	TF Series
Category	Automobile
Language	English