Manage Device Security
274
Insight Managed 8-Port Gigabit Ethernet Smart Cloud Switch with 2 SFP Fiber Ports
5. Select Security > ACL > Advanced > IPv6 ACL.
The IPv6 Configuration page displays.
6. Select the check box that is associated with the IPv6 ACL.
7. Click the Delete button.
The IPv6 ACL is removed.
Configure Rules for an IPv6 ACL
You can define rules for IPv6 ACLs. The access list definition includes rules that specify
whether traffic matching the criteria is forwarded normally or discarded.
Note: An implicit deny all rule is included at the end of an ACL list. This
means that if an ACL is applied to a packet and if none of the explicit
rules match, then the final implicit deny all rule applies and the packet
is dropped.
Add a Rule for an IPv6 ACL
 Add a rule for an ACL IPv6:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Access the Switch on page 11.
The login window opens.
4. Enter the switch’s password in the password field.
The default password is password. If you added the switch to a network on the Insight
app before and you did not yet change the password through the local browser interface,
enter your Insight network password.
The System Information page displays.
5. Select Security > ACL > Advanced > IPv6 Rules.
To Next Page
Loading...
Need help?
General
