Manage Power over Ethernet
311
Insight Managed 8-Port Gigabit Ethernet Smart Cloud Switch with 2 SFP Fiber Ports
Manage and View the PoE Port Configuration
Depending on the model, the switch includes eight PoE or PoE+ ports.
 To configure and view the PoE or PoE+ port settings:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired network connection, or connect directly to a switch that is
of
f-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser
, enter the IP address of the switch.
If you do not know the IP address of the switch, see Access the Switch on page 11.
The login window opens.
4. Enter the switch’
s password in the password field.
The default password is password. If you added the switch to a network on the Insight
app before and you did not yet change the password through the local browser interface,
enter your Insight network password.
The System Information page displays.
5. Select System > PoE >
Advanced > PoE Port Configuration.
The previous figure does not show all columns on the page.
6. Select the check boxes for the PoE or PoE+ ports that you want to configure or select the
check box in the heading to configure all eight PoE or PoE+ ports.
7. Configure the settings as described in the following table.
To Next Page
Loading...
Need help?
General
