Chapter 8 Extended Data Lifecycle Management
Incomplete EDLM Scans
Scalar i500 User’s Guide 217
9 Click Apply.
The settings are configured. When complete, a Success message
appears.
10 Click Close to close the Success message.
The main screen appears again with the server you just entered listed.
There is a Run button in the Diagnostics column.
11 Click the Run button to test the settings you configured. If a Failed
message appears, you can click the Failed
link and a message box
appears to help you troubleshoot. Make sure the IP addresses and
port numbers you entered are correct, and that the plug-in is
supported.
Figure 32 Testing the StorNext
Settings
Note: The default StorNext Storage Manager port number is
61776. If you changed the port on your server, be sure to
type the new port number into this field.
Troubleshooting text box
Failed message/link
To Next Page
Loading...
Need help?
General