Chapter 12 Installing, Removing, and Replacing
Preparing the Library for Moving or Shipping
Scalar i500 User’s Guide 485
8 Remove all tape cartridges from the library.
9 Remove the tape drives from the library to decrease the weight when
lifting the modules.
10 If rack-mounted, remove one module at a time from the rack. Retain
the rack-mounting hardware and shelves for use in the new location.
11 Place the module in the bottom of the shipping carton.
12 Reinstall the tape drives in the module.
13 Complete the packing. For further details, see the Unpacking
Instructions.
Warning: Without tape drives, tape cartridges, or power
supplies, a control module weighs approximately 60
lbs (27.2 kg). An expansion module, without tape
drives, tape cartridges, or power supplies, exceeds 65
lbs (29.5 kg).
To avoid serious injury, at least two people are
required to safely lift the modules.
To Next Page
Loading...
Need help?
General