Chapter 3 Configuring Your Library
Working With Partitions
Scalar i500 User’s Guide 72
the default setting, you can choose a library type that your host has
previously qualified. This makes the partition appear to the host as
the selected library type and should allow the host to communicate.
• ADIC Scalar i500 (default)
• Quantum Scalar i500
• Quantum Scalar i2000
• ADIC Scalar i2000
• ADIC Scalar 100
• ADIC Scalar 24
•
Media Barcode Format — This setting tells the library how to read and
report barcodes of the tape cartridges in the partition. The library
supports the following options (for definitions of each of the options,
see Supported Barcode Formats
on page 527).
•
Standard (default)
•
Standard Six
•
Plus Six
•
Extended
•
Media ID Last
• Media ID First
• Number of Slots — The number of storage slots allocated to the new
partition.
•
Drives — The tape drive or drives assigned to the partition.
Note: Before creating partitions, verify that all tape drives are
unloaded. For information on unloading tape drives, see
Unloading Tape Drives
on page 256.
Note: Creating Partitions operations cannot be performed
concurrently by multiple administrators logged in from
different locations. You can access the screen, but you cannot
apply changes while another administrator is performing the
same operation.
To Next Page
Loading...
Need help?
General