8. Pull the paper feed roller shaft [A] out from the left side of main machine and remove the entire
paper feed roller [B] and 2 press rollers [C].
Re-installation
1. When you mount the paper feed roller into the shaft, mount the side with the fixing pin's guide first.
Connecting Rollers
Preparation
• Duplex unit ( p.48)
• All covers ( p.50)
• Feed clutch ( p.93)
• Bypass drawer connector ( p.117)
• Vertical encoder wheel ( p.71)
• Charger roller ( p.96 "Transport Belt, Charge Roller, Pressure Plate, Pressure Rollers")
4. Replacement and Adjustment
126
To Next Page
Loading...
Need help?
General