Backup image file
Recommended Backup Options for E-24B
• When creating a backup of the system image, you have the option to create a bootable backup
image on an external USB device. This is recommended, as the external USB device directly boots
the E-24B, enabling recovery from crucial situations such as when the software has corrupted,
HDD has been replaced and is currently empty, etc.
•
Restoring the E-24B system image reformats the hard disk and overwrites any customizations and
data created since the backup image was last created. All print jobs are lost when the system
image is restored.
1. After installing all system patches and configuring the E-24B according to the customer
requirements, back up the customized E-24B system image onto an external USB device
with the “create bootable files” option selected from the WebTools menu. [Link to
page 137 "Backing Up the E-24B System with Fiery System Restore (WebTools)"]
• Back up the configuration settings, as Fiery System Restore (WebTools) does not back up job
logs and VDP/FreeForm resources. [Link to page 132 "Backing Up/Restoring the System
Configuration and Selected Settings Only"]
4. System Maintenance
128
To Next Page
Loading...
Need help?
General
