Notes on Special Paper
Paper Type Note
Setting envelopes page 128 "Envelope Orientation and Recommended Status"
Setting label paper
(adhesive labels)
• We recommend that you use specified label paper. If paper other than
the specified one is used, normal operation and quality cannot be
guaranteed.
• In the paper settings on the [Media] hub, specify [Labels] in [Paper
Type], and specify an appropriate item from [Paper Weight].
Setting transparencies • When using transparencies, check their print sides carefully. Erroneous
loading may cause problems. Remove copied or printed sheets one by
one.
• Remove copied or printed sheets one by one.
• When loading a transparency on the paper tray, specify
[Transparency] in [Paper Type] of the paper settings on the [Media]
hub.
• Fan the sheets before loading them on the tray. If you leave the sheets
stacked on the tray for a long time, they may stick together, and cause
a misfeed to occur.
• When ejecting the printed sheets to High Capacity Stacker, specify the
stacker upper tray as the output tray.
See "Printer Settings", User Guide.
Setting translucent
paper
• When loading translucent paper, always use long grain paper. Paper
is classified in two different grain types: long grain and short grain.
Load paper on the paper tray according to the recommended grain.
• Translucent paper easily absorbs humidity and becomes curled.
Remove curl in the translucent paper before loading.
• Remove copied or printed sheets one by one.
2. Paper Specifications and Adding Paper
122
To Next Page
Loading...
Need help?
General
