Setting Items Values Default Value
01: Auto Execute Belt Smoothing: For Belt
Scratches
Normal
Frequently (With
Density Adjustment)
More Frequently
Most Frequently
Normal
02: Auto Execute Belt Smoothing: For Uneven
Gloss
Off
On
On
0511: Fusing Belt Smoothing Adjustment
Set the conditions for Fusing Belt smoothing.
Setting Items
Default
Value
Max.
Value
Min.
Value
Step Unit
01: Roller Speed (Uneven Gloss)
02: Roller Speed (Belt Scratches:
Short Time)
03: Roller Speed (Belt Scratches:
Long Time)
100 100 50 1 %
0512: Fuser Unit Speed Adjustment
Performs adjustment to compensate for the deviation in the rotation speed of the fusing unit. The machine
adjusts the rotation speed of the fusing unit to an appropriate value.
This adjustment takes approximately three minutes. During adjustment, the machine displays a message
on the control panel. Do not open the front cover of the machine while the machine is adjusting the
rotation speed.
Setting Item Remarks
01: Execute Press [Execute] to execute the function.
Specify the nip to optimize the line speed of the fusing unit.
5. Adjustment Settings for Operators
208
To Next Page
Loading...
Need help?
General
