*1
5th station upgrade kit is required.
0205: Density Difference Printing: Setting
The sensitivity is updated when you execute [Density Difference Printing: Across Feed] after specifying
"0" in this setting.
When you perform an adjustment print, 50 sheets are output.
Setting Item
Default
Value
Max.
Value
Min.
Value
Step Unit
01: Update Sensitivity
*1
0 6 0 0.01 mg/
cm2/-
kV
*1
The value varies depending on the machine model. Also, the value changes when [Density Difference
Printing: Across Feed] is executed.
02: Machine: Image Quality
203
To Next Page
Loading...
Need help?
General
