Note that when there is paper that is ejected normally on the tray, the remaining paper is stacked over
the existing paper on the tray.
Setting Item Setting Value Default
01: Finisher Shift Tray 1
02: Stacker Upper Tray
03: Second Stacker Upper Tray
Off
On
Off
0307: Auto Continue Paper Feeding
Specify whether to resume feeding paper automatically when a feeding problem occurs on a specific
tray.
Setting Item Setting Value Default
01: Tray 1
02: Tray 2
03: 2-Tray LCIT: Bypass Tray
04: 2-Tray LCIT: Tray 3
05: 2-Tray LCIT: Tray 4
06: 2-Tray LCIT: Tray 5
07: 2-Tray LCIT: Tray 6
08: 2-Tray LCIT: Tray 7
09: 2-Tray LCIT: Tray 8
Off
On
Off
03: Machine: Paper Feed/ Output
205
To Next Page
Loading...
Need help?
General
