Setting Item Max. Value Min. Value Step Unit
71: Heat Roller Temp: Clear/Special/72:
Heat Roller Temp: White/73: Heat Roller
Temp: Metallic/74: Heat Roller Temp:
Option
200 100 1 Degree C
75: Corct Temp: Init Fd: Clear/
Special/76: Corct Temp: Init Fd:
White/77: Correct Temp: Initial Feed:
Metallic/78: Correct Temp: Initial Feed:
Option/79: Corct Temp: Pre-Fd: Clear/
Special/80: Corct Temp: Pre-Fd:
White/81: Correct Temp: Pre-Feed:
Metallic/82: Correct Temp: Pre-Feed:
Option
30 0
83: Init Sht Intvl: Low: Clear/Special/84:
Init Sht Intvl: Low: White/85: Initial Sheet
Interval: Low: Metallic/86: Initial Sheet
Interval: Low: Option/87: Init Sht Intvl:
Clear/Special/88: Init Sht Intvl:
White/89: Initial Sheet Interval:
Metallic/90: Initial Sheet Interval: Option
3 None
1233: Fusing Pressure Temperature
BW/FC/FCS
Under the following conditions, adjust pressure roller temperature.
Black & White Printing /Full Color Printing/Full Color Printing including Special
High Quality is not applied in DFE Setting
Setting Item Max. Value Min. Value Step Unit
01: Pressure Roller Temp: BW/FC/FCS 200 50 1 Degree C
FCS/S
Under the following conditions, adjust pressure roller temperature.
Full Color Printing including Special Color
4. Adjustment Setting Items for a Custom Paper
178
To Next Page
Loading...
Need help?
General
