13: Machine: Paper Feed/Output
1301: 2-Tray LCIT: Paper Feed Mode
Adjust the fan operation if double feed or nonfeed occurs in Wide Large Capacity Tray.
Setting Item Values
01: Paper Feed Mode:Fan Level Prevent Double Feed (Weakest Blow)
Prevent Double Feed (Weaker Blow)
Standard (Default)
Prevent Non Feed (Stronger Blow)
Prevent Non Feed (Strongest Blow)
1302: 2-Tray LCIT: Fan/Shutter
Updraft Fan Level
Under conditions below, adjust vacuum fan operation in Wide Large Capacity Tray. Increase the air
volume with [+], and decrease it with [-]. [S: - 150/L: 150.1 mm -] [s: - 148/m: 148.1 - 487.7/l:
487.8 - 700/xl: 700.1 mm -]
Setting Item Max. Value Min. Value Step Unit
01: Size: Across: S/Feed: s/02: Size:
Across: S/Feed: m/03: Size: Across: S/
Feed: l/04: Size: Across: L/Feed: s/05:
Size: Across: L/Feed: m/06: Size: Across:
L/Feed: l/ 07: Size: Across: L/Feed: xl
100 0 10 %
Blower Fan Level
Under the following conditions, adjust the blower fan operation in Wide Large Capacity Tray. Increase
the air volume with [+], and decrease it with [-]. [S: - 150/L: 150.1 mm -] [s: - 148/m: 148.1 -
487.7/l: 487.8 – 700/xl: 700.1 mm -]
13: Machine: Paper Feed/Output
187
To Next Page
Loading...
Need help?
General
