Siemens SINUMERIK 828D Programming Manual

Flexible NC programming
1.21 Check for presence of file (ISFILE)
Job planning
Programming Manual, 07/2010, 6FC5398-2BP40-0BA0
141
1.21 Check for presence of file (ISFILE)
Function
The ISFILE command can be used to check whether a file exists in the NCK's static user
memory (passive file system).
Syntax
<result>=ISFILE("<file name>")
Significance
ISFILE: Command for checking if the specified file exists in the passive file
system.
Name of the file whose existence is to be checked in the passive file
system.
Type: STRING
<file name>:
The following points should be noted when specifying the file name:
• The specified file name must not contain any blank spaces or
control characters (characters with ASCII code ≤ 32).
• The file name can be specified with path data and file identifier.
– Path data
Path data must be absolute, i.e. start with "/".
If a path is not specified, the file is searched for in the current
directory (= directory of selected program).
– File identifier
If the file name does not contain a domain identifier ("_N_"), it is
added accordingly.
If the fourth-last character of the file name is an underscore "_",
the next three characters will be interpreted as the file identifier.
In order to be able to use the same file name for all file
commands, e.g. via a STRING type variable, only the _SPF and
_MPF file identifiers may be used.
If there is no "_MPF" or "_SPF" identifier, the file name is
automatically completed with _MPF.
• The file name length can be up to 32 bytes, the path length up to
128 bytes.
Example:
"PROTFILE"
"_N_PROTFILE"
"_N_PROTFILE_MPF"
"/_N_MPF_DIR_/_N_PROTFILE_MPF/"

Siemens SINUMERIK 828D Specifications

General

Brand	Siemens
Model	SINUMERIK 828D
Category	Control Systems
Language	English