Siemens SINUMERIK ONE MCP 2400.4c Operation/Programming

8
Tool Management 08/2005
8.3 Sortin
g
tools
8
♥ Siemens AG, 2005. All rights reserved
8-364 SINUMERIK 840D sl Operation/Programming ShopTurn (BAT) – 08/2005 Edition
8.3 Sorting tools
When you are working with large magazines or several magazines, it
is useful to display the tools sorted according to different criteria. Then
you will be able to find a specific tool more easily in the lists.
-or-
 Select the "Tool list" or “Tool wear” softkey in the "Tools WOs"
operating section.
Sort
>
 Press the "Sort" softkey.
To
magazine
-or-
To name
-or-
To type
-or-
To
T-number
 Activate one of the softkeys to choose the sort criteria.
The tools are listed in the new order.
8.4 Deleting tools from the tool list
Tools that are no longer in use can be deleted from the tool list for a
clearer overview.
 Select the "Tool list" softkey in the "Tools WOs" operating area.
 Place the cursor on the tool that you would like to delete.
Delete tool
Delete
 Press the "Delete tool" softkey.
 Press the "Delete" softkey.
The tool data of the selected tool is deleted and the magazine location
is enabled again.

Siemens SINUMERIK ONE MCP 2400.4c Specifications

General

Brand	Siemens
Model	SINUMERIK ONE MCP 2400.4c
Category	Control Systems
Language	English