FUEL SYSTEM AND THROTTLE BODY 13-3
• Lift and hold the fuel tank.
• Disconnect the fuel pump coupler 3.
• Place a rag under the fuel hose 4 and disconnect the fuel
hose 4 from the fuel pump.
• Remove the fuel tank assembly.
• Remove the fuel pump assembly 6 by removing its mounting
bolts 5 diagonally.
FUEL TANK AND FUEL PUMP
INSTALLATION
Install the fuel pump and fuel tank in the reverse order of
removal. Pay attention to the following points:
• Install a new O-ring 1 and apply grease to it.
99000-25010: SUZUKI SUPER GREASE “A”
or equivalent
* Be sure to disconnect the fuel hose 4 by hand. Do
not disconnect the fuel hose 4 with any tool.
* When removing the fuel tank, do not leave the fuel
hose 4 on the fuel tank side.
Never disassemble the fuel pump assembly 6.
Replace the O-ring 1 with a new one.
To Next Page
Loading...
Need help?
General
