PERIODIC MAINTENANCE 2-17
OIL STRAINER (No.2) INSTALLATION
• Install the oil strainer No.2 1 and tighten the oil strainer No.2
bolts 2 to the specified torque.
Oil strainer No.2 bolt: 5.5 N·m (0.55 kgf-m, 4.0 lbf-ft)
• Install the oil pump No.2 cover 3 and tighten the oil pump
No.2 bolts 4 to the specified torque.
Oil pump No.2 bolt: 11 N·m (1.1 kgf-m, 8.0 lbf-ft)
• Install the magneto cover. (15-19)
• Install the gearshift lever. (9-7)
INSPECTION AFTER INSTALLATION
• Engine oil level and oil leakage (2-12)
OIL STRAINER (No.1) INSTALLATION
• Install the oil strainer and then tighten the engine oil strainer
cap 1 to the specified torque.
Engine oil strainer cap: 21 N·m (2.1 kgf-m, 15.0 lbf-ft)
• Add new engine oil and check the oil level. (2-12)
Replace the gasket washer with a new one.
To Next Page
Loading...
Need help?
General
