Suzuki RM-Z250 Service Manual

2-14 PERIODIC MAINTENANCE
ENGINE OIL FILTER CHANGE
• Drain the engine oil as described in the engine oil replace-
ment procedure.
• Remove the oil filter cap 2 by removing its bolts 1.
• Remove the spring 3 with oil filter 4.
• Apply engine oil lightly to the gasket of new oil filter 5 before
installation.
• Install the new oil filter 5.

• Apply engine oil lightly to the new O-ring 6.

• Install the oil filter cap and tighten the bolts.
 Oil filter cap bolt: 11 N·m (1.1 kgf-m, 8.0 lbf-ft)
• Add new engine oil and check the oil level as described in the
engine oil level inspection procedure.
 Oil change.......... 850 ml (0.9/0.7 US/Imp qt)
Filter change...... 900 ml (1.0/0.8 US/Imp qt)
Overhaul............. 1 000 ml (1.1/0.9 US/Imp qt)
Make sure that the oil filter installed properly. If the fil-
ter is installed improperly, serious engine damage
may result.
Replace the O-ring with a new one.

Suzuki RM-Z250 Specifications

General

Brand	Suzuki
Model	RM-Z250
Category	Motorcycle
Language	English