Suzuki RM-Z250 Service Manual

16-10 FRONT AND REAR WHEELS
• Install new dust seals 1 and apply grease to their lips.
NOTE:
When installing the dust seal, place the manufacturer’s code
indicated side of the dust seal outside.
 09913-70210: Bearing installer set (10 – 75 )
Oil seal:  42 Attachment
 99000-25010: SUZUKI SUPER GREASE “A”
or equivalent
DISC PLATE REPLACEMENT
• Remove the disc plate 2 by removing its bolts 1.
• Apply THREAD LOCK SUPER to the disc plate bolts 1.
99000-32110: THREAD LOCK SUPER “1322”
or equivalent
• Tighten the disc plate bolts 1 to the specified torque.
 Disc plate bolt: 26 N·m (2.6 kgf-m, 19.0 lbf-ft)
REAR SPROCKET REPLACEMENT
• Remove the rear sprocket 2 by removing its bolts and nuts
1.
NOTE:
Install the rear sprocket as the letter on the sprocket surface
faces outside.
• Tighten the rear sprocket bolts and nuts 1 to the specified
torque.
 Rear sprocket nut: 30 N·m (3.0 kgf-m, 21.5 lbf-ft)

Suzuki RM-Z250 Specifications

General

Brand	Suzuki
Model	RM-Z250
Category	Motorcycle
Language	English