Suzuki RM-Z250 Service Manual

FRONT FORK AND STEERING 18-21
• Remove the handlebar holders, damper bushings and spac-
ers.
• Remove the steering stem nut 0 with the special tools.
NOTE:
Hold the steering stem lower bracket to prevent it from falling.
 09940-14911: Steering stem nut socket wrench
09940-14960: Steering stem nut socket wrench
• Remove the steering stem lower bracket A and lower bear-
ing.
• Remove the washer B, upper dust seal C and upper bearing
D.
INSPECTION
• Inspect the removed parts for the following abnormalities.
• Distortion of the steering stem
• Bearing wear or damage
• Abnormal bearing noise
• Race wear or damage
• Damper bushing wear or damage
• If any abnormal points are found, replace defective parts with
new ones.

Suzuki RM-Z250 Specifications

General

Brand	Suzuki
Model	RM-Z250
Category	Motorcycle
Language	English