Suzuki RM-Z250 Service Manual

18-10 FRONT FORK AND STEERING
• Drain the fork oil from the damper rod assembly by moving
the inner rod several strokes.
INSPECTION
CENTER BOLT
• Inspect the adjuster rod of the center bolt for damage. If it is
damaged, replace it with a new one.
COMPRESSION DAMPER UNIT
• Inspect the compression damper unit for damage. If it is dam-
aged, replace it with a new one.

INNER TUBE AND OUTER TUBE
• Inspect the inner tube for scratches. If it has scratches,
replace it with a new one.
• Inspect the outer tube for dent. If it is dented all the way to the
inner side, replace it with a new one.
• Measure the inner tube runout using the V blocks and dial
gauge.
 Inner tube runout
Service Limit: 0.4 mm (0.02 in)
 09900-20607: Dial gauge
09900-20701: Dial gauge chuck
09900-21304: V blocks
* Disassembling the compression damper unit can
lead to trouble.
* Do not attempt to disassemble the compression
damper unit.

Suzuki RM-Z250 Specifications

General

Brand	Suzuki
Model	RM-Z250
Category	Motorcycle
Language	English