Suzuki RM-Z250 Service Manual

20-32 SERVICING INFORMATION
HANDLEBAR SET-UP
*2
*1
*3
*8
*4
*5
*6
*7
FWD
FWD
FWD
FWD
FWD
FWD
1
Throttle cable
(Pulling cable)
d 121 mm (4.76 in) *4
Align the matching surface of
throttle case with marking.
2
Throttle cable
(Returning cable)
e 175 mm (6.89 in) *5
Align the “ ” mark on the left
handlebar grip with marking.
A Marking f 14 – 16 mm (0.55 – 0.63 in) *6
Apply adhesive to the handlebars
and inner of left handlebar grip.
a 145 mm (5.71 in) *1
Align the matching surface of
master cylinder with marking.
*7
Set the velcro of handlebar pad
to backward.
b 190 mm (7.48 in) *2
Align the matching surface of
clutch lever holder with marking.
*8
Align the matching surface of
handlebar holder with marking.
c 2 – 3 mm (0.08 – 0.12 in) *3 Tighten the lever side bolt first.

Suzuki RM-Z250 Specifications

General

Brand	Suzuki
Model	RM-Z250
Category	Motorcycle
Language	English