Suzuki RM-Z250 Service Manual

MACHINE TUNING 4-9
• Make sure approx. 10 mm (0.39 in) of inner rod thread is
exposed on the end.
2 Lock-nut
a Approx. 10 mm (0.39 in)
• Install the damper rod assembly. (18-15)
• Insert the push rod 4 into the inner rod.
• Insert the shaped projection A of center bolt 5 into the
push rod B. (18-16)
• Check or adjust the clearance between the lock-nut 2 and
center bolt 5 to provide more than 1 mm (0.04 in) and more.
(18-16)
• Tighten the lock-nut/center bolt to the specified torque.
 Lock-nut/center bolt: 22 N·m (2.2 kgf-m, 16.0 lbf-ft)
• Tighten the center bolt to the specified torque.
 Center bolt: 69 N·m (6.9 kgf-m, 50.0 lbf-ft)
b 1 mm (0.04 in) and more
• Pour the specified amount fork oil into the outer tube in accor-
dance with the following table.
 99000-99001-SS5: SUZUKI FORK OIL SS-05
or equivalent
SPRING
STD OIL
QUANTITY
OIL QUANTITY ADJ.
RANGE
Soft 51171-28H10
375 ml
(12.68/13.20
US/Imp oz)
312 – 411 ml
(
10.55/10.99 –
13.89/14.47 US/Imp oz)
STD 51171-28H00
375 ml
(12.68/13.20
US/Imp oz)
312 – 411 ml
(
10.55/10.99 –
13.89/14.47 US/Imp oz)
Hard 51171-28H20
375 ml
(12.68/13.20
US/Imp oz)
312 – 411 ml
(
10.55/10.99 –
13.89/14.47 US/Imp oz)

Suzuki RM-Z250 Specifications

General

Brand	Suzuki
Model	RM-Z250
Category	Motorcycle
Language	English