1. Press the Powershift limiter push button to activate the limiter.
The Powershift gear that is in use when you press the button is set as the
limit. The Powershift automatics do not shift to a gear higher than this. If
Powershift gear 5 in the C range is selected, the Powershift limiter prevents
the automatic shifting between the C and D ranges.
The gear set as the limit appears in a pop-up view on the tractor terminal
display.
C3
0
A5
B4
RPM
240
Cruise
1 2.9
2 6.2
Cruise
0
P
AUTO 1
PS
5
GUID-F103C1B9-9B02-498C-A4E5-9385EAA403C8
1. Powershift limiter
2. To deactivate the limiter, press the button again.
3.8.11.9 Programming automatic shifting between speed ranges C and D
You can program the shifting automatics to change the speed range
automatically between the speed ranges C and D through the tractor terminal
transmission settings. In this case the speed range changes automatically
according to the driving situation.
1. Press ESC.
2. Navigate to the menu 2 with the up and down arrow buttons.
3. Press the right arrow button to enter the transmission settings view.
4. Select the wanted memory slot with the left and right arrow buttons.
5. Move the navigation box to the speed range C-D shifting automatics position
with the up and down arrow buttons or by rotating the selector for the
predefined factory/user settings.
6. Press the right arrow button, OK button or the selector for the predefined
factory/user settings.
3. Operation
- 112 -
To Next Page
Loading...
Need help?
General
