Valtra T series Versu User Manual

When the differential lock is engaged, the indicator light is lit on the
instrument panel.
If the indicator light on the instrument panel flashes in the automatic position,
there is an error, and the differential lock disengages for safety reasons. The
reason for the error may be one of the following:
• The speed sensors are not calibrated.
• The turning angle sensor is not calibrated (contact an authorised Valtra
workshop).
• There is a fault in the switch (the service code is displayed).
• There is a fault in the speed sensors (the service code is displayed).
3.8.19.2 Engaging and disengaging the differential lock
You can control the engagement of the differential lock with the differential lock
switch.
If a wheel starts to slip, engage the differential lock. If a wheel is slipping heavily,
reduce the engine speed before engaging the lock. If possible, disengage the
lock while driving on public roads.
NOTE: For optimum performance, engage the differential lock before a wheel
slips.
1
ECO
GUID-46A07AA8-B569-42A6-8CAA-0F51EBBF1CB7
1. Differential lock switch
• To engage the differential lock, press down the symbol side of the differential
lock switch (ON).
• To use the automatic function of the differential lock, turn the differential lock
switch to the middle position (AUTO).
The switch light is lit green.
• To disengage the differential lock, press down the side of the differential lock
switch opposite to the symbol (OFF).
3. Operation
- 125 -

Valtra T series Versu Specifications

General

Brand	Valtra
Model	T series Versu
Category	Tractor
Language	English