Valtra T series Versu User Manual

• Fasten the seat belt to the anchor points on the seat.
• Adjust the backrest inclination.
• Pull the backrest inclination lever up.
• Set the backrest to the desired position.
• Adjust the armrest.
• Remove the cover.
• Change the armrest position in the mounting slot.
• Adjust the lumbar support.
Turn the knob clockwise or anti-clockwise to adjust the lumbar support. The
height and depth are adjusted at the same time.
• Turn the seat heating on or off.
• Adjust the headrest height by lifting or lowering it.
• Remove the headrest by pulling it upwards.
3.2.2 Adjusting the Valtra Evolution driver's seat
You can adjust the Valtra Evolution driver's seat according to your height and
weight. With these adjustments you can minimize the exposure to vibration,
obtain the best support for your lower back and get the most comfortable driving
position. Note that you may need to change the adjustments according to work
conditions or the components you are using such as the tyre type. Valtra
Evolution driver's seat is extra equipment. If the tractor is equipped with reverse
drive controls, it cannot be equipped with a seat with lateral suspension.
CAUTION: Do not attempt to adjust the seat while driving. There is an
increased risk of loss of control.
3. Operation
- 57 -

Valtra T series Versu Specifications

General

Brand	Valtra
Model	T series Versu
Category	Tractor
Language	English