supplementary feature can be used to help release and lock the pick-up hitch
when the upper limit is set to maximum.
3.13.7 Using the linkage floating position
Use the floating position when working with implements which have to follow the
ground surface. Such implements are, for example, sowing machines and rollers.
GUID-5D7D75B3-D009-45D8-A3B9-4CA5C64A962A
1. Lower indicator light
2. Position control knob
IMPORTANT: Always use the floating position for implements following the
ground contour. Otherwise there is a risk that the implement may get damaged or
the traction of the wheels may be lost.
• To activate the floating position, turn the position control knob clockwise to its
extreme position.
The lower links can now move freely up and down following the movements
of the implement. The lower indicator light is lit continuously.
• To deactivate the floating position, turn the position control knob anti-
clockwise.
The floating stops when the position control knob is moved approximately to
position 1. The lower indicator light goes out.
3. Operation
- 189 -
To Next Page
Loading...
Need help?
General
